REPLISIL 35 NO Food translucent SET, silicone


REPLISIL 35 NO Translucent SET - versatile silicone rubber for food contact
Discover REPLISIL 35 NO Translucent SET, the high-quality RTV-2 silicone rubber for a wide range of applications. This two-component, addition-curing silicone offers outstanding properties and is therefore ideal for precise moulding and creative projects, especially for food. The silicone has been tested by the German Federal Institute for Risk Assessment (BfR) and the Food and Drug Administration (FDA) and is therefore approved for contact with food.
Areas of application
- Precise moulding of objects
- Production of negative moulds that come into contact with food
- For the production of baking moulds, icing, chocolate moulds and much more
- Creative projects for hobby users and professionals
Product advantages
- Shore A hardness 35 for optimum flexibility and mould stability
- Good flowability, liquid silicone rubber
- Easy mixing of the components in a 1:1 ratio
- Non-stick effect for easy release of the models
- Translucent appearance for versatile applications
- High moulding accuracy for detailed results
- Excellent for moulding in the food sector (e.g. chocolate, marzipan, baking mixes, egg)
- Temperature-resistant from -40°C to +200°C (even up to 270 °C for short periods)
- High-quality silicone from Germany
Processing instructions
Mix components A and B carefully in a 1:1 ratio to ensure optimum homogeneity of the material. Process the silicone quickly within the pot life and allow the mould to fully cure according to the curing times. Then demould carefully so as not to damage any fine details. Attention: The platinum catalyser is in component A. Please only use components from the same batch. Silicones are highly temperature-sensitive. For this reason, please observe the recommended temperature specifications for storage and processing.
Downloads
Technical data
Product Details "REPLISIL 35 NO Food translucent SET, silicone"
Color: |
translucent |
---|---|
Curing time at 23 degrees Celsius: |
60 Min. |
Dimensional change (% after 24h): |
< 0,2 |
Elongation at break (in %): |
450 |
Mixing ratio: |
1:1 |
Mixing time at 23 degrees Celsius: |
10 Min. |
Shore hardness: |
A35 |
Specific weight: |
1,13 |
Viskosität ca.: |
6000 mPas |
Material: |
Silicone, food-safe |
Data according to manufacturer. Subject to errors and changes.